MIK-PH5011 pH sensor
-
Specification
| Product | Plastic pH sensor |
| Model | SUP-PH5011 |
| Measurement range | 2 ~ 12 pH |
| Zero potential point | 7 ± 0.5 pH |
| Slope | > 95% |
| Internal impedance | 150-250 MΩ(25℃) |
| Practical response time | < 1 min |
| Installation size | Upper and Lower 3/4NPT Pipe Thread |
| NTC | NTC10K/Pt100/Pt1000 |
| Heat resistance | 0 ~ 60℃ for general cables |
| Pressure resistance | 0 ~ 4 Bar |
| Connection | Low-noise cable |
-
Introduction
-
Product advantages
It adopts international advanced solid dielectric and large-area Teflon liquid contact, which has no blockage and convenient maintenance.
Long distance reference diffusion path can greatly prolong the service life of the electrode in harsh environment.
PPS / PC shell and 3 / 4 NPT pipe threads are adopted, which is easy to install without sheath and saves installation cost.
The electrode adopts high-quality low-noise cable, so that the signal output length is more than 40m without interference.
There is no need to supplement the dielectric and maintain it slightly.
High precision, fast response and good repeatability.
Ag / AgCl reference electrode with silver ion.
Operate correctly and prolong service life
Side or vertical installation on the reaction tank or pipeline.
